In new apartments or houses we have Ethernet connectivity in all rooms, with an RJ-45 socket where we put the network cable and already have a connection to the local network. If you want to install RJ-45 sockets in your home, as if it were another socket in the house, today we will explain how you can assemble one and thus hide all the walls of your pipes inside the home network installation. As we have already discussed in a previous article, if you need to make several network cables of different sizes, it is more convenient for you to buy all the hardware than to buy the already made cable.
However, in this case, you have no choice but to do it yourself, as you will have to run the wiring throughout your house, or at least, in one or more rooms. At RedesZone, we will recommend the materials you will need to easily connect your entire home. If you have already Buy Email Database purchased the hardware, the most important thing to remember is that the cabling must be Cat6 or better. Tools for installing an RJ-45 jack Ethernet Network Cable Reel: Cat 6 or better and UTP Today we recommend that you only buy Cat6 cabling or higher, this cabling ensures that the connection speed will be 1 Gbps or higher, as long as you do not exceed.
The corresponding 100 meters in a single section. If you want to leave the network ready for multi-frequency speeds such as 2.5G, 5G and even 10G, we recommend buying a higher cable such as Cat6A, CAT7 and even Cat 7A, but the latter is much more expensive. You can read our full article on Types of Ethernet network cables currently in existence, and when we should use one class or the other. Depending on the length of cable you need, you can choose a 50 meter spool and even a 305 meter spool.